Finally have spent some time in the last few weeks working on the boat and am starting to get some done! I have a bunch of photos so i will let them do the talking.  Also my beer and hour count is updated!  

Decided to do a two part seat so when the boat is heeled and i am hiking its more comfortable. 

Ian testing the seat

Back angle.

Front Angle

Rough Fit of cedar strip and top pieces.

Test fit was a success

Glued up.

Sanded Smooth

Yes this is a beer tap installed i mean why not? 

Ian Snagging some of his homebrew from the tap.

Nick getting a drink.  Needless to say we didnt get much done this night. 

Ground down the inside of the cedar strip side pieces. 

.

Dusty as shit.

Learned my lesson from sanding cedar.  I left this thing on all night so i was able to breathe for the rest of the week. 

Cockpit seat / side panels fitted and done.  

Floor cut and fit.

Bow Sprit hole drilled.  Building a similar articulating setup to the PDX guys with a bit of my own twist using arched harken track and foam.  More on this in the next few weeks. 

A few pics from Heineken High Preforamnce Dinghy Open. 

Sailing day 1 over.  Free Heineken starts now. 

Not hiking hard enough and getting a tan line from my Merica headband. 

Nearing windward mark frigging two boat lengths behind Ben. 

My Soling and PHRF team cleaning house at the fall banquet.