So i started on my cradle. I plan to build a support for the boat at each bulkhead at the correct height and shape using the bulkhead shape + 1/4 inch for the plywood. This should allow the boat to be the correct shape. I will have more on my design as i build more.
Doing some serious math! Trying to figure out all the leingths to cut up the 2x4s.
Beer helps with math.
Here is the base of the cradle. This is from frame 214 to 89 its 7 feet wide. There is one cross member for each bulkhead. One is not shown.
Beer: 2
Hours: 4
No comments:
Post a Comment