Friday, March 30, 2012

Frames are in!

Frames are in and where to begin!
Every frame went in from a mesurement from the stern.  Measure from the stern and mark each sheer with a straight edge between each sheer with level find and mark the bottom of the hull.  The only issue is had was Frame 53.5.  I had herd other peole having issues with this frame.  I left 1/2" extra on each side of the frame and i still had to pull the hull a long way in!  I would recommend leaving extra on frame 53.5 in order to keep a nice flow to the hull.




I used a spoon to create these fillets.  I like using a spoon i was able to change the diamiter of the fillet by the angle of the spoon.


Here it is all taped up with 15oz biax glass.

No comments:

Post a Comment